Candy Grand'O Vita GVSH9A2DE80 9Kg Heat Pump Tumble Dryer, 14 Programmes, Sensor Dry - White

Product Information

Once you have cleaned out the condenser you should make sure that the thermostats have been reset and then test the machine. Keep the lint filter clear Just to summarize everything that you should do when your Candy tumble dryer has an E21 error code: On the top of the heating element, you will find the thermostats. The one on the right can be pushed in to reset it.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other tumble dryers: It’s also a concern for safety if the lint filter overflows as it can cause a fire if the machine doesn’t cope with the excess lint. The fluff can make it through to the heating element at the rear which then burns it out. Inspect the control board and wiring Four Drying Levels - Choose the level of dryness you require - Ready to Iron, Dry Hanger, Dry Wardrobe and Extra DryThis means that the control board is struggling to carry out that particular drying cycle due to a hardware error on the control board. This is where the moisture is removed from the air and turned into water that then gets pumped into the water tank.

Unfortunately, a thermostat reset will only work if the source of your heating problem is the thermostat itself. But there may be other causes contributing to your dryer under- or overheating that have nothing to do with the thermostat. Heating elements for tumble dryers are usually fairly economical to replace and it’s definitely worth fixing your dryer if the heater is at fault. Sensor drying works well: The Candy’s 15 programmes do a great job of automatically drying clothes just the right amount – not too much, not too little – with only the Cottons Eco programme tending towards over-drying.We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.

Sensor Dry - The machine will automatically stop the cycle when it detects that the load is dry. This avoids the cycle continuing until the timer ends, saving time, energy and money However, these coils can become ineffective by breaking or misshaping, pulling them too close to or far away from the drum.We have purposely not listed any Candy tumble dryer spares in this article as it covers multiple models from a vast range with numerous changes made to teh spare parts used and subsequent replacement spare parts. They will also often look the same or similar yet be different or, look totally different yet be completely comptible as they've been altered. This post shows you how to diagnose and repair a Hoover Candy tumble dryer with a faulty capacitor can be used on some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt Models.